Bituminous coatings, pastes

Cold bitumen coating IBITOL is an organic solvent-based bitumen coating. It is used as a cold base coating for all surfaces on which bitumen waterproofing is installed. It is applied with a roller or brush on a clean, dry and dust-free base. Between 0.2 and 0.3 L of the coating per m². The drying time … Continued

PRIMER S is a polymer coating based on fast-drying organic solvents. It is applied with a roller. Consumption depends on the absorbency of the substrate and ranges from 0.20 to 0.50 L/m². The drying time depends on layer thickness and weather conditions, ranging from half an hour to one hour. Use: Impregnation of metal, wood and concrete … Continued

Waterproofing bituminous paste BITU PASTA is a one-component waterproofing paste based on organic solvents for use with the cold method.

Single-component polymer-bitumen paste IZO PASTA is a single-component polymer-bitumen paste based on aqueous dispersion (solvent-free) for cold installation.

Polyester felt is used for reinforcing waterproofing pastes and coatings.

Mass for waterproofing by the hot method BITEM is a compound of oxidized bitumen and mineral fillers. It is used in waterproofings for gluing bitumen membranes onto thermal insulation boards by hot method. Usage of the compound has an average of 2 kg/m². The compound is normally prepared in special cauldrons with a mixer and … Continued

BITU E is a compound of bitumen modified with elastomer additives. It is used for hot bonding of elastomere bitumen membranes. It is applied by pouring the hot compound under the bitumen membrane. The easily fusible polymeric sheeting on the membrane must be removed in this case. Usage of the compound has an average of … Continued

ELASTIBIT S is a bitumen compound with elastomeric additives for greater flexibility and artificial resins for better adhesion to the substrate. It is applied with a roller. Consumption depends on the absorbency of the substrate and ranges from 0.20 to 0.50 L/m². The drying time depends on layer thickness and weather conditions, ranging from half … Continued

Single-component water-based polymer-bitumen paste for cold installation IZOFLEX PASTA is highly elastic, weather resistant and resistant to standing water. It adheres to all types of building materials: concrete, metal, plasterboard, wood, ceramics, glass, bitumen. No priming of the substrate is required. When applied to concrete, the substrate humidity must be below 3%. Its thixotropic properties … Continued

Sealing and adhesive bitumen compound BITUFIX F is a sealing and adhesive bitumen compound based on solvents, for application with a gun for sealing compounds.

Polyurethane adhesive TERMIFIX is used for bonding thermal insulation boards of polystyrene to bitumen membranes, or to a concrete or brick surface.